Fieldpiece SRL2K7 Infrared Refrigerant Leak Detector

Infrared Refrigerant Leak Detector for HVACR - Superior Sensitivity in a Rugged Design for HVAC/R
Click To Enlarge
  • Item #: SRL2K7
  • Manufacturer: Fieldpiece's
  • Condition: New
Price $344.00
Availability Not In Stock, Call

Fieldpiece SRL2K7

 Work's with CFC, HCFC, And HFC

Fieldpiece is Teating to see if the SRL2K7 Will

work with HFO 1234yf

(No answer)

Shipped via USPS Priority Mail

 

Fieldpiece SRL2K7 Infrared Refrigerant Leak Detector for HVACR - Superior Sensitivity in a Rugged Design for HVAC/R Premium performance in an ergonomic, rugged design. Infrared (IR) sensor exceeds current SAE standards for sensitivity. Find leaks of 0.1-oz./yr. Doesn't trigger on oil or moisture like other sensors. Advanced sensor lasts many years without replacement. Water-blocking filter for added protection. Visual/audible alarms trigger on CFCs, HFCs, HCFCs or blends. Self-calibrates for testing in contaminated environments. Features: non-conductive sensor arm; rechargeable 8-hour lithium-ion battery; peak and mute buttons; % battery charge check; magnetic hanger.

 

 

How Does it Work?

 

The SRL2 triggers on a change in refrigerant levels as refrigerant passes by the sensor.  Infrared (or IR) sensors work on the principle that refrigerants reflect a certain spectrum of light that is “below red” or infrared.  When refrigerant is drawn into the sensor, it travels between a light/heat source and a sensor that is constantly receiving a “picture” of that light. 

 

Like a cloud that reflects solar radiation and “blocks” out the sun, the refrigerant reflects the infrared radiation and blocks the sensor from receiving the complete picture.  The result is a trigger.  However, after the “picture” stays the same for a while, the sensor no longer senses a change and the triggering stops.  This is important.

 

IR sensors act almost exactly like the motion sensors that trigger your neighbor’s blinding garage lights outside.  The outside sensors are taking a picture of a designated area.  When someone walks into that picture a change is detected.  The light turns on.  If you stand in the same place without moving, eventually the light turns off until you move again.

 

Because of this unique sensor, IR detectors that sense change are used differently from the more commonly used heated element detectors. You have to use a double-pass or sweeping motion to pinpoint a leak, meaning, you pass by a refrigerant “stream” it blocks out light to the sensor and triggers.  Then you sweep back, and it triggers again. The midpoint is the source of the leak.  (See the SRL2 Quick Start Guide for examples.)

 

 

 

Competitive Advantages

 

The SRL2 essentially reacts to all refrigerants the same, meaning it triggers on R-507 the same way it does on R-22.  The SRL2 has sensitivity equal to or better than heated element detectors and sensitivity can be adjusted to react like heated elements using the Turbo Mode (see manual) function.
Simply put, the SRL2 reacts to all refrigerants the same way.  If the refrigerant used in the system is in the refrigerant IR spectrum, the detector is going to find it.

 

Why Infrared Technology?
Infrared sensors by far are the longest-lasting leak detection sensors on the HVACR market today. We've improved the technology so that, with normal use, your SRL2 Infrared Refrigerant Leak Detector should last for the life of the instrument (UP TO 10 YEARS in testing.)